C-Mount to T-Thread Adapter
With female C-Mount threads on the inside and male T-threads on the
outside, this adapter allows C-Mount and CS video type lenses to be
mounted on cameras that have female T-threads. 1/8" thick, black
anodized aluminum, with two tooling holes for installation and removal.
Note: Don't let the sun be in the field or you may damage the camera!
Supplied with a .062" thick spacer washer for use with CS video lenses
on the Meade DSI Pro camera with ScopeStuff #DSIF faceplate. The
spacer washer fits inside female T-threads, and fits over male C-mount
threads. Lens infinity stop isn't valid.
Also available is #C2CS adapter for using C-Mount video lenses on the
Meade DSI Pro camera equipped with ScopeStuff #DSIF faceplate.
The focus range of C-mount lenses is very narrow, and the spacing from
the rear of the lens to the camera imager chip is critical, so this adapter
won't automatically work for all cameras without spacing adjustment. The
spacing from the camera imager chip to the #T2CA should be about 1/2".
Click image to enlarge:
Prices include shipping in the USA!
Ordering Information
Click image to enlarge:
ScopeStuff Home
