EbonyStar Laminate Strips
This EbonyStar laminate (Formica) has a textured surface that works
very well with PTFE to provide a low friction bearing surface. Great
for Dobsonian altitude bearings. 0.045" thick, dark grey and white
mottled color. Easily cut by scribe and snap method, edges can be
cleaned up with a fine file or sandpaper. Adhere with contact cement.
PTFE strips sold separately, see below.
The strips are straight enough that strips can be adhered side-by-side
and the seam is not a concern.
1.5" width can be assembled with two 3/4" strips.
2" width can be assembled with two 1" strips.
1.75" width can be assembled with 1" and 3/4" strips.
Prices include shipping in the USA! ($10.00 Minimum Order)
Ordering Information
It has been suggested that we are passing EbonyStar 4552-90 off as 4552-50.
We sell only Wilsonart 4552-50 and have plenty in stock! (Click to enlarge)
PTFE Pads are Here!
PTFE Strips are Here!
EbonyStar Dob AZ Bearings are Here!
ScopeStuff Home
